About us

Jayasree Reva Phoenix Metrology Private Limited is India’s Largest Integrated & NABL Accredited Calibration | Testing Laboratory; Technically, the best and infrastructural, the largest integrated Calibration | Testing Laboratory with 20 Metrological Laboratories, all under one-roof to serve our customers. Please visit www.revacalibration.com to get to know about our state-of-the-art integrated facility and Calibration & Testing Services. 

JRPM is a premier Calibration & Testing Laboratory, ISO 9001: 2015 Certified and accredited by NABL for the latest ISO IEC 17025: 2017 for Calibration, located in Chennai, India.  Being an all-in-one integrated Calibration & Testing Laboratory, we provide Annual Maintenance Contract (AMC) as a Single Source facility for all your Calibration & Testing needs. We provide “at-lab” and “On-site” Calibration & Testing Services using the best of Calibration & Testing Master Equipment. We offer turn-key Solution and Service with all the Calibration & Testing Laboratories under one roof. We also function as a Nodal Laboratory for Inter-Laboratory Comparison (ILC) with the best Uncertainty | CMC values for most of the Lab parameters.

We are also working towards becoming an accredited laboratory for ISO/IEC 17043: 2023 | Conformity assessment – General requirements for the Competence of Proficiency Testing Providers.

Mechanical | Dimension – All Basic & Precision Equipment| CMM Calibration | Pressure – up to 4000 Bar | Torque – up to 3000 Nm | Mass E1| Volume – Micro Pipette| Electro-Technical MFC & Oscilloscope | Thermal – Furnace Mapping & Pyrometer up to 1750°C | Force | Optics | Light Source | Lux Meter (0.0001 lux  to 2,00,000 Lux)| Acceleration & Speed | Tachometer | Rubber Hardness Tester | Fluid Flow | Anemometer | Acoustics | Mechanical Testing | Mechanical Calibration | Rockwell | Brinell | Vickers | Micro-Vickers | UTM Calibration | UTM CTM TTM | Impact Testing Machine Calibration | Force Gauge | Push Pull Gauge | Leeb Hardness | Portable Hardness Tester | Dynamic Hardness Tester | E1 Calibration | Density & Viscosity | Air Flow Meters | pH Meter | Conductivity Meter | Lab Master Equipment Calibration

JRPM provides Annual Maintenance Contract (AMC) as a Single Source facility for all your Calibration & Testing needs for the whole year.

Jayasree Reva Phoenix Metrology Pvt. Ltd. is:

Salient Customer service features & facilities that we provide:

India’s Largest Integrated Calibration & Testing Laboratory

India’s Largest Integrated Calibration & Testing Laboratory

NABL Accredited for 20 Calibration & Testing Labs 

Single source facility for all your Calibration & Testing requirements

Latest ISO/IEC 17025: 2017 Accredited

State-of-art Laboratory with best in class Masters

ISO 9001: 2015 Certified for Laboratory QMS

Free pick-up – collection and delivery of equipment – within Chennai*

Nodal ILC Lab with best CMC for most parameters

Annual Maintenance Contract (AMC) for Calibration & Testing

5S Certified & Platinum Awarded by QCFI & ABK-AOTS DOSAKAI

Traceability Certificates provided, as required by Customers

Single-source facility for all the Calibration & Testing requirements

100% guaranteed delivery – 24 hours / 48 hours / 72 hours

Personnel Training for Calibration & Testing Laboratories

No additional Cost for express Calibration / Testing services and delivery

Training & Consultancy services for ISO/IEC 17025: 2017

Mobile Calibration | Equipment Collection | Delivery services

Assisting Clients to set-up their World-Class Laboratories

Working on setting up our branch Laboratories in the Middle East

Calibration Services:

Calibration & Testing Services:

Mechanical Calibration

ISO/IEC 17025 Accredited Mechanical Testing Lab

Dimensional Lab | Largest Scope for Dimension in India

Fully computerized state-of-the-art Mechanical Testing facility

Pressure Lab

UTM – Calibration & Testing

Torque Lab

Rockwell Hardness – Calibration & Testing 

Mass & Volume Lab

Micro Vickers Hardness – Calibration & Testing

E1 Weights Calibration*

Vickers Hardness – Calibration & Testing

Density & Viscosity*

Brinell Hardness – Calibration & Testing

Acoustics Lab – Sound Level Meter

Impact Testing Machine – Calibration & Testing

Electro-Technical Lab

Force & Hardness Calibration:

Thermal Lab, IR Thermometer, Pyrometer, -80, -196, 1750 deg C

UTM | CTM | TTM Calibration using Load Cells  | Durometer

Acceleration & Speed – Tachometer, 15 rpm – 1,00,000 rpm

Speed & Displacement Calibration of UTM

Shore Hardness, Shore A, B, C, D, E, O, DO

Rockwell Hardness 

Optics | Photometry – Lux Meter & Light source Calibration

Micro Vickers Hardness

1 Lux to 2,00,000 Lux Calibration   

Vickers Hardness

Fluid Flow – Anemometer

Brinell Hardness

Force Gauge | Push Pull Gauge | Durometer

Portable Leeb Hardness Tester Calibration

We are the only Laboratory in India certified for 5S, best-in-class Laboratory practices, awarded by Quality Circle Forum of India (QCFI) and the honor of being awarded by ABK-AOTSDOSAKAI.

We operate out of a highly sophisticated and state-of-art 8000 square feet facility in Chennai that features 20 environmentally controlled laboratories, equipped with precision Calibration & Testing equipment. All reference used in Calibration & Testing are traceable to National / International Standards.

Specialty of our Laboratory is into the Calibration of Masters such as LMM, CMM, Profile Projectors, Gauge Block Set, DCT, FCDM, Electronic Probe with DRO, Caliper checker, Analytical balance, Precision balance, Thermal Mapping, E1 Class Standard Weights, Hydrometer, Flow cups, Pressure / Vacuum Calibrator, 8 1/2 DMM, Multi-function Calibrators, 6 1/2 DMM, PRT, ‘S’ Type Thermocouple, Temperature Dry Block Calibrator, Oil bath furnace, UTM, TTM, CTM, Push & Pull force gauge, Durometers (Shore A & D), Rockwell, Brinell, Vickers, Micro Vickers and Leeb portable hardness testing machine, Charpy and Izod impact testing machines, Anemometer, Tachometer, RPM source, speed & Displacement of UTM, Illuminance / Lux meter, Light source (Tungsten Halogen lamp), etc.,

We are known for the Quality and Reliability of our at-lab and On-site Calibration and Testing results and services; Best of Calibration & Testing Equipment and the Master’s used and as a Turn-key Solution and Service provider with all the Calibration & Testing Laboratories available in Single Source.

Our Laboratories are staffed with highly competent and certified team of engineers and technicians who are ready to support you with a wide range of services in all phases of your measurement projects and with our service contracts that are individually tailored to your needs, you are assured of being on the safe side, whether you require all the services or only a few of them. We even offer regular skills development training and conduct workshops for our workforce, enabling them to be equipped with the latest software, technology and equipment that are installed at our unit.

We provide high-quality Calibration& Testing services with documentation that satisfies industry and regulatory or audit requirements. It is our goal to be at the forefront of the Calibration, Inspection, Testing and Training Business by providing impressive range of services using state-of- the-art metrology equipment.

We offer independent Third party Calibration / Testing services to industry and other organizations in order to verify/assure the quality, safety, and security of the products and it compliance to the National and International specifications. The partial specification testing, full specification testing and developmental assistance testing services are carried out as per the requirements of User / Customer / Manufacturer at our laboratory.

We’re constantly updating and expanding our Calibration / Testing capabilities by listening to your business requirements, committing financial resources to new instruments and dedicating many hours to extensive employee certification and training. Remaining up-to-date with instrumentation and techniques is crucial to your success and ours. We assist you in improving the quality and competitiveness of your products through reliable and traceable to National/International standards. We are committed to delight our customers with our competency and quick service with high quality in a timely manner.


Scroll to Top